10 Using the Camera as a Web Cam
IMPORTANT!
Before using the Web Camera function, make sure that your camera has been
switched to PC Camera mode. (Please refer to “Changing the Driver Type Between
Mass Storage Mode and PC Camera Mode” on page 64 for more details.
• Setting up NetMeeting™
NOTE:
Set the camera to Video Mode before starting NetMeeting™.
1. Place the camera into the docking station. For further details, refer to
“Using the Docking Station” on page 9.
2. Plug the labelled end of the USB cable into the socket marked
on your computer. Plug the other end of the USB cable into the
USB port on the docking station.
3. When it is the rst time to use the camera as a “Web Cam”. The
Windows may prompt the user to insert the Windows system disk.
Please insert the izone300™ driver CD or the Windows CD into the
CD-ROM drive to install the requested les.
4. Connect your microphone (not included) and speakers (not included)
to your audio card’s Mic in and line out jack respectively.
To Next Page
Loading...
Need help?
General
