• Auto Power Save Setting
The camera performs the following power save operations to conserve
battery power.
OFF The power save feature is not activated.
1/3/5 MIN The camera is designed to switch off automatically to
save battery life after the specied period of inactivity.
You can change the power save setting according to the following steps:
1. Set the camera to Still Image mode.
2. Access the Setup menu.
3. Press the
or
button to select “AUTO OFF”.
4. Press the
S
E
T
button.
SETUP
: SET
FORMAT
DATE/TIME
AUTO OFF
BEEP
FREQUENCY
5. Press the
or
button to select the desired
setting.
6. Press the
S
E
T
button.
AUTO OFF
OFF
1 MIN
3 MIN
5 MIN
: SET
NOTE:
• Auto power off is automatically disabled under any one of the following
conditions.
- While an auto play is undergoing.
- While the camera’s USB port is connected to a computer or other external
devices, or while the camera is being controlled by an external device.
• The LCD screen automatically goes to hibernation after one minute of
inactivity. Press any button, except the Power button, to re-activate the
LCD screen.
To Next Page
Loading...
Need help?
General
