• Setting Self-timer
Your camera is designed with a self-timer function which will allow you to
take picture with the 10 seconds build in timer.
1 Turn on the camera.
2 Set the Mode selector to Capture mode (the Status LED blinks once).
Press
Press
Press
The icon
appears on LCD screen. Press Shutter
button to perform self-timer. A timer appears in the
centre of LCD screen and the camera beeps indicating
self-timer is activating.
NOTE:
Self-timer feature is only applied to next picture. When
self-timer is activated, status LED turns green, while the
self-timer LED turns red and blinks slowly for 8 seconds,
then blinks quickly for 2 seconds before the picture is
taken. Please place the camera on a at surface or use
a tripod.
To Next Page
Loading...
Need help?
General
