Polaroid PhotoMAX PDC 640 Quickstart Guide 13
Setting the date and time
You need to set the date and time the first time you turn
on the camera.
To set the date and time:
1.
Turn on the camera.
If this is the first time you are turning on the
camera, go to step 6.
2.
Press the Menu button.
3.
Press the down arrow button to display the next set
of options.
4.
Press the button next to
Settings
.
5.
Press the button next to
Date & Time
.
6.
Press the button next to the right arrow on the LCD
viewfinder to move the cursor to each part of the
date and time that you want to change.
7.
Press the up arrow or down arrow to change the
number under the cursor.
8.
Press the button next to
Done
to save the date and
time.
You now are ready to take pictures! Press the Menu
button to change other camera settings, or use the
optical viewfinder or the LCD viewfinder to take
pictures.
PDC640.FM Page 13 Wednesday, September 30, 1998 1:23 PM
To Next Page
Loading...
Need help?
General
