Why does my Polimaster Measuring Instruments have no sound alarm?
If the Polimaster Measuring Instruments dosimeter does not produce a sound alarm, first ensure that the sound alarm is enabled in the settings or via computer communication mode. If the sound alarm is already enabled and there is still no sound, it may indicate a sound alarm failure, in which case you should contact the manufacturer for repair.
What to do if Polimaster Measuring Instruments shows ERROR message?
If your Polimaster Measuring Instruments dosimeter displays an "ERROR" message, this indicates a GM detector failure. Contact the manufacturer for repair.
How to fix Polimaster Measuring Instruments that cannot power on?
If the Polimaster Measuring Instruments dosimeter cannot power on, the most likely cause is a discharged battery. Charge the battery to resolve this issue.
What to do if USB connection to Polimaster Measuring Instruments isn't established?
If communication with the computer isn't established automatically upon connecting the USB cable to the Polimaster Measuring Instruments dosimeter, go into “SETTINGS”, select the USB line, and briefly press “SELECT”. The dosimeter will then go into communication with the computer after an audio signal.
General| Brand | Polimaster |
|---|---|
| Model | PM1610B |
| Category | Measuring Instruments |
| Language | English |
Outlines the intended uses and measurement capabilities of the dosimeter.
Specifies the environmental parameters for safe and accurate operation.
Lists all items included in the dosimeter's package for initial setup.
Details the various functional modes available on the dosimeter.
Defines the DER/DE measurement limits and permissible errors.
Explains how to set and manage alarm levels for radiation detection.
Describes the external structure, components, and dimensions of the dosimeter.
Explains the underlying technology and data processing within the dosimeter.
Guides the user through initial checks, preparation, and battery installation.
Details the process for measuring Dose Equivalent Rate (DER).
Explains how to measure Dose Equivalent (DE) and its accumulation time.
Covers the menus for customizing units, language, alarms, and display.
Provides instructions for connecting the dosimeter to a computer for data transfer.
Describes regular upkeep, cleaning, and battery replacement.
Offers solutions for common operational problems and error messages.
Outlines the purpose, procedures, and equipment for instrument verification.
Details the methods for calculating DER and DE measurement errors.
Provides information on the proper and safe disposal of the dosimeter.
To Next Page
