Need help?Do you have a question about the Polimaster PM1703MO-1 and is the answer not in the manual?
General| Detected Radiation Types | Gamma, Neutron |
|---|---|
| Display | LCD |
| Operating Temperature Range | -20°C to +50°C |
| Ingress Protection | IP54 |
| Detector type | GM tube |
| Energy Range (Gamma) | 0.06 MeV - 3.0 MeV |
| Energy Range (Neutron) | Thermal - 14 MeV |
| Dose Rate Range | 0.01 μSv/h - 10 mSv/h |
| Dose Range | 0.01 µSv to 10 Sv |
| Dose Rate Accuracy | ±15% |
| Alarms | Audible, Visual |
| Power Supply | 2 x AA batteries or rechargeable battery pack |
| Weight | 0.5 kg |
Details the two control buttons on the instrument's top panel and their functions.
Lists technical specifications including detectors, sensitivity, energy ranges, and response times.
Instructions on how to install a rechargeable NiMH battery into the instrument.
Explains how to recharge the battery using the supplied charger and holder.
Describes how to attach or detach the instrument clip for fastening to a belt or pocket.
Details the installation of the charger holder and the process of charging the instrument battery.
Information on the types of warning signals the instrument can produce based on threshold values.
Defines the manufacturer preset dose rate thresholds and associated alarm signals.
Specifies the manufacturer preset dose threshold and the corresponding alarm signals.
Describes the automatic turn-on procedure and how to manually turn the instrument OFF.
Details the instrument's self-test sequence and the background calibration process.
Outlines the different operational modes available for the instrument.
Explains the use of Search Mode for detecting and localizing gamma radiation sources.
Describes the DER measurement mode for displaying dose rate values.
Details the DE Indication mode for displaying accumulated dose values.
Instructions on how to perform manual background calibration to adapt to environmental changes.
Discusses alarm levels derived from ambient background and the n coefficient.
Explains factors influencing false alarms and expected frequencies.
Describes the 'ot' message displayed when the instrument exceeds its temperature limits.
Guide to adjusting parameters like n coefficient, audio, and vibration alarms via the setup menu.
Instructions on how to adjust the n coefficient for the gamma channel.
Procedure to enable or disable audio and vibration alarms within the instrument settings.
To Next Page
