geneo+U
35
SAFETY FEATURES OF THE SYSTEM
• The Ultrasound Applicator is designed to operate with your current geneo+U system. All safety
features incorporated in the system serve as the Ultrasound Applicator safety features.
•
The Ultrasound Applicator must be properly connected to the system and locked prior to activation.
• To start the treatment, the Applicator Switch must be pressed by the operator. Ultrasound is
emitted only after pressing the switch.
• The system automatically identies the Applicator connection and distinguishes between
the Ultrasound Applicator and the other Applicators. The system allows you to operate only the
connected Applicator and will use only its operational procedure.
• An independent electronic circuit stops the operation of the system in case of a software error.
• Patient safety is subject to a well-trained sta. Patient education is also important, so information
about the nature the treatment and its expectations should be provided prior to commencement
of the treatment.