POLLOGEN GENEO+U - Kit Components and Controls; Ultrasound Applicator Description; Ultrasound Applicator Holder; Labels Used on the Ultrasound Kit

geneo+U
36
LABELS USED ON THE ULTRASOUND KIT
The following labels are axed to the back of the geneo+U of the
Main Unit and to the kit components
Ultrasound Applicator kit label sleeve Ultrasound Applicator serial number label
KIT COMPONENTS AND
CONTROLS
The geneo+U Ultrasound kit consists of the following main
components:
• geneo+U Ultrasound Applicator (left)
• Ultrasound Applicator Holder Kit
ULTRASOUND APPLICATOR
Ultrasound Applicator is connected to the main unit by a cable
containing electrical wiring and a connector. The applicator
consists of a plastic body with an integrated electronic system,
Ultrasound electrode, Start/Stop button and two indication
LEDs.
When not in use, the applicator should be stored in its holder
with head facing down.
ULTRASOUND APPLICATOR HOLDER
The Ultrasound Applicator holder is used to hold the
Ultrasound Applicator.