47
Charging Operation
Charge the battery as follows
1. Power off.
2. Insert the DC adaptor plug in the DC jack on the back of charger.
3. Insert the battery or radio with battery vertically in a charger, to check whe-
ther the battery and charger terminal is in normal contact.
4. Make sure the battery and charger terminal is in good contact, when the
charging indicator light turns red, it starts charging.
Note
Before inserting the battery, it is abnormal if the charging indicator blinks.
To change the battery for charging, please wait until the indicator is stable.
When the battery is well inserted, the indicator turns red and the charging is on
the process, if the indicator blinks, then the battery is damaged or the tempera-
ture is too high or too low.
Normal charging indicator
When charging the battery, if the indicator light turns red, the battery is on the
normal charge; if the red indicator light blinks constantly, the battery capacity is
too low, and is on the trickling charge, and after the battery capacity reaches a
certain level, it will switch to the normal charge.
Note
Trickling charge does not exceed 30 minutes, if the red indicator light blinks after
30 minutes, it means the charger can not charge battery, please check whether
the battery or the charger has been damaged.
To Next Page
Loading...
