76
FM RADIO FUNCTION
On/off radio receiver
Under standby mode, press + MONI to open FM radio function, LCD display
“88.00M”, press + MONI to exit FM radio function.
Note: Under FM radio mode, if receiving the signal, the radio will be out of FM
mode, after 5s, it will back to FM mode when the signals disappear.
FM Radio storage
It is the same as the channel storage.
Or you can storage the channel by software.
FM radio channel delete
Under FM memory mode, turn off the radio, press key to turn on the radio,
you will see “DEL” in the screen and the channel number blinks, press or
to choose the channel number you want to delete, press toconrm.Repeater
this operation, you can delete all memory channel, 25 in maximum.
DTMF Encoding
To send DTMF signaling manually, keep pressed PTT button then key input DTMF
code, then release PTT button to pause.
DTMF signaling
Press , then press , then key input DTMF code, 16 digits in maximum, then
press PTT to send this ID.
Note:
When key input code, press MONI to delete last digit, short press CALL to be back
to standby mode.
To Next Page
Loading...