57
WORKING MODE
Frequency Mode (VFO)
Under this mode, you can use key to change the frequency, then press /
or the channel knob or input the frequency by keypad directly and store channel.
Frequency-Channel Mode (MR)
When you have stored a memory channel at least and under VFO mode, press
key to enter MR mode.
The frequency will be indicated on the display and the channel No. will be indi-
cated at the right side. If the transceiver display name option is ON and channel
name edited, it will show the name of the channel.
Channel Mode (CH)
When you have stored a memory channel at least, it can work in CH mode. Chan-
nel No. will be indicated on the display. Press , then turn on the radio, it will
enter CH mode, press , then turn on the radio, it will exit CH mode.
To Next Page
Loading...