49
INSTALLATION OF ACCESSORIES
Installation of Battery Pack
1. Align the two grooves of battery and the guide rail on the back of aluminum
shell, ensuring full contact and in parallel, then push the battery up to the
radio base along the rail on the back of aluminum shell, until the battery latch
locks up, pic. 1.
2. To remove the battery, please make sure the radio is closed, push the battery
latch down, and make sure the radio and battery is on the releasing state,
and then push the battery out from the radio, pic. 2.
Pic. 1 Pic. 2
To Next Page
Loading...
