Poly Edge B30

Enter values into the required field text boxes.
REQUIRED FIELDS:
Name
■
Enter a name for the extension being created. Example: John Smith.
E-mail
■
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: john.smith@bicomsystems.com
Auto Provisioning
■
Set to Yes.
MAC Address
■
Enter Poly Edge B30 phone MAC address. Example: 9CADEF123456. MAC address can
be found at the back of the phone.
Click on the Save button.
■
Registering Phone
This chapter describes how to register Poly Edge B30 phone using TFTP, HTTP or HTTPS.
TFTP, HTTP or HTTPS
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
■
Enter username and password and press Confirm button. NOTE: Factory default login
■
details are username: admin and password: admin.
Click on System Management link in the left navigation menu.
■
Click on Auto Provisioning link in the submenu, and in the ITSP Provisioning section enter
■
the following in the ConfigURL field:
NOTE: Our recommendation is to use the HTTP.
■
Example for Hostname using HTTP:
http://username:password@abc.bicomsystems.com/prov/phone$mac.cfg