Poly Rove B2 Configuration Guide

Choose what server type you intend to use: HTTP, HTTPS, and Trivial FTP. NOTE: Our
■
recommendation is to use HTTP.
If you choose to use HTTP or HTTPS server type, enter http:// or https:// followed
by Hostname or IP Address, and then followed by /prov/phone$mac in
ConfigURL.
Replace username and password with Auto Provisioning username and password.
Example of a Hostname using HTTP:
http://username:password@abc.bicomsystems.com/prov/phone$mac.cfg
Example of a Hostname using HTTPS:
https://username:password@abc.bicomsystems.com/prov/phone$mac.cf
g,tls-profile=1 NOTE: When using HTTPS, it is required to add tls-
profile=1.
Example of an IP Address using HTTP:
http://username:password@192.168.1.10/prov/phone$mac.cfg
Example of an IP Address using HTTPS:
https://username:password@192.168.1.10/prov/phone$mac.cfg,tls-profi
le=1

Poly Rove B2 Specifications

General

Caller ID	Yes
Connectivity	DECT
Battery	Lithium-ion
DECT Range	Up to 300 meters outdoors
Speakerphone	Yes
Frequency Band	1.9 GHz
Number of Handsets	1
Conference Calling	Yes