2 Hold the guest headset's Volume up until the headset LED turns on.
3 The primary user hears a triple tone indicating a conference request. To accept the request, press
the primary user's headset Call button within 10 seconds.
4 If the process fails or times out because the guest's Call button is not pressed within 10 seconds,
the guest subscription is terminated and the guest hears an error tone.
NOTE Headsets in a conference have independent mute controls. The base only indicates the primary
user's mute state.
Exit a conference call
1 Guest headsets can remain as guests through multiple calls. To remove a guest headset, press the
guest headset's Call button or dock the primary user's headset in the charging cradle. The primary
user hears a single tone in their headset as each guest leaves the call.
NOTE The primary user may hear additional tones in their headset and see the base subscription LED
flash as guest headsets join the call. These indicate that a guest headset has a different firmware
version than the primary headset, but can still be used for conferencing.
13
To Next Page
Loading...
