1
Poly Studio R30 USB Video Bar
This document covers Poly Studio R30 (Regulatory Models P032 & P032NR).
Service Agreements
Please contact your Poly Authorized Reseller for information about service agreements applicable to your
product.
Safety, Compliance, and Disposal Information
● This equipment is intended for indoor use only.
● This equipment is not intended to be directly connected to outdoor cables.
● Always disconnect the system from power before cleaning or servicing.
● In order to remove all power from this unit, disconnect the power supply mains cord.
● Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a
static-free cloth.
● Do not immerse the system in any liquids or place any liquids on it.
● Do not disassemble this system. To maintain the warranty on the system, a qualified
technician must perform service or repair work.
● There are no user serviceable parts inside this product.
● This product is intended to be powered by an external (LPS) power supply - use only the type
which is supplied with this product.
● Do not use a power cord that is damaged. This could cause fire or electric shock. Contact the
manufacturer for a replacement cord, if necessary.
● Only use a power cord which is appropriately rated and approved relevant to the country of
use.
● This equipment is not intended to be operated by children.
● When connecting to the mains supply, connect only to an earthed supply outlet which is
installed near the equipment and is easily accessible.
● Keep ventilation openings free from any obstructions.
● The ambient operating temperature rating of this equipment is 0 - 40ºC and should not be
exceeded.
Installation Instructions
Installation must be performed in accordance with all relevant national wiring rules.
SAFETY AND REGULATORY NOTICES
Software 1.0.0 | November 2022 | 3725-69386-001C
To Next Page
Need help?
General
