Poly Studio X70 User Manual

Camera Priority
When you connect or disconnect a camera, camera priority determines the primary or active camera.
▪ When you attach a camera to a system that’s powered on, it automatically becomes the current
people camera.
▪ If you attach a camera during a call, it automatically becomes the current people camera.
▪ If you disconnect the current people camera, the system falls back to the next priority camera.
The system observes the following camera type priority:
1. Embedded camera
2. HDCI camera
3. USB camera
4. HDMI source set to display as people
Select the Primary Camera from the Local Interface
In Poly Video Mode, when you attach multiple cameras to the system, select the primary camera from the
local interface.
Procedure
1. Go to Menu > Camera > Select Camera.
2. Select a camera from the list.
The selected camera becomes the primary camera.
Cameras
29

Poly Studio X70 Specifications

General

Control	Touch interface, remote control
Operating System	Poly VideoOS
Product Type	Video conferencing system
Video Standards	H.264, H.265
Bluetooth	Bluetooth 5.0
Frame Rate	30 fps
Memory	4 GB RAM
Audio	Stereo speakers, microphone arrays
Connectivity	USB-C, Bluetooth, Wi-Fi
Video Output	HDMI
Audio Input	Microphone array
Wireless Protocol	Wi-Fi 802.11a/b/g/n/ac
Video Resolution	Up to 4K
Zoom	5x digital zoom
Interfaces	HDMI, Ethernet
Network Protocol	TCP/IP, DHCP
Security Protocols	802.1x authentication
Management	Poly Lens
Video Conferencing Support	Zoom, Microsoft Teams
Storage	16GB eMMC
Weight	4.4 kg (9.7 lbs)