Poly Voyager 8200 UC - Interact with Microsoft Softphone; Play;Pause Music; Track Selection; Voice Control

• Tap the red Mute button
• Take off/put on your headset while on an active call (requires active smart sensors)
Hold a call
Double-tap the Call
button to put a call on hold. Tap the Call button again to answer an
incoming call.
NOTE Up to 2 calls can be put on hold.
Switch between calls (flash)
Double-tap the Call
button to switch between calls.
NOTE Flash functionality works only between calls of the same type. Flash does not work
between mobile and softphone calls.
Call back last call
Double-tap the Call button
.
Answer calls from a second device
It's easy to answer calls from two devices (including softphone).
When on a call, you hear a ringtone notification of the incoming call from the second
paired device.
To answer a second call from the other device, first tap the Call
button to end the current
call and tap the Call button again to answer the new call. If you choose to not answer the
second call, it will go to voicemail.
• For Microsoft Teams, tap the headset's Call
button to interact (application required).
• For Skype for Business, press and hold the headset's Call
button for 2 seconds to interact
(application required).
• Set your target phone by going to Poly Lens Desktop App > Softphones > Software
Settings > Target Softphone
Tap the Play/pause
button.
NOTE Because your headset is equipped with sensors, if you are playing music and you take off
your headset, your music pauses. If you put on your headset, your music resumes (functionality
varies by application and doesn't function with web-based apps).
Tap the Forward button
or Back button to control the track selection.
Siri, Google Assistant
™
, Cortana Press and hold the Play/pause
button for 2 seconds
until you hear the tone to activate your smartphone's default voice assistant.
It takes up to 3 hours to fully charge your headphones. The LEDs turn off once charging is
complete.
=
=
=
=
=
TIP To check the headphones battery status, tap the Call button while wearing your
headphones. Headphones must be in idle state.
Interact with Microsoft
softphone
Play/pause music
Track selection
Voice control
Charge
11