Poly Voyager Focus 2 User Manual

• To position the microphone on the right or left side, rotate the microphone boom up and over.
Bend the boom so it is approximately 2 finger widths from the corner of your mouth.
NOTE Your headset senses when you change the microphone boom from one side to the other and
syncs the audio specific to each side.
• Gently flex the headband wider if the fit is uncomfortable on your ears.
Charge your headset using the micro USB cable or the charge stand (sold separately). The headset
LEDs flash when charging. It takes approximately 2 hours to fully charge your headset. The LEDs
turn off once charging is complete.
NOTE The micro USB cable and charge stand (sold separately) plug into a computer or wall charger's
USB port.
Micro USB cable Charge stand (sold separately)
Headset LEDs What they mean
Off Charging complete
Battery high
Battery medium
Battery low
Battery critical
Check your headset battery status:
• With headset inactive, slide and release the Power
switch away from the off position. Listen to
the voice alert or observe the headset LEDs.
Fit and charge
Wear on the right or left
Charge
Check headset battery
status
7

Poly Voyager Focus 2 Specifications

General

Speaker Frequency Response	20 Hz - 20 kHz
Microphone Frequency Response	100 Hz - 8 kHz
Earpads	Leatherette
Active Noise Cancelling	Yes
Connectivity	Bluetooth 5.1
Microphone	Triple-mic with Acoustic Fence technology
Wireless Range	Up to 50 meters/164 feet
Wearing Style	Over-ear
Charging Time	2 hours
Smart Sensors	Yes
Charging	USB-A/USB-C
Compatibility	PC, Mac, Mobile Phone
Controls	Call answer/end, mute, volume +/-, power on/off, ANC control
Weight	175 grams