Polycom SoundPoint IP 601 Specifications
Part No. 3726-17368-001 Rev. 9/05
www.polycom.com
Polycom Headquarters: 4750 Willow Road, Pleasanton, CA 94588 (T) 1.800.POLYCOM (765.9266) for North America only.
For North America, Latin America and Caribbean (T) +1.925.924.6000, (F) +1.925.924.6100
Polycom EMEA: 270 Bath Road, Slough, Berkshire SL1 4DX, (T) +44 (0)1753 723000, (F) +44 (0)1753 723010
Polycom Asia Pacific: Polycom Hong Kong Ltd., Rm 1101 MassMutual Tower, 38 Gloucester Road, Wanchai, Hong Kong, (T) +852.2861.3113, (F)+852.2866.8028
Lines (Direct Numbers)
• Up to 6 lines (SoundPoint IP 601 alone)
• Up to 12 lines (SoundPoint IP 601 with Expansion
Module)
Protocol Support
1
• IETF SIP (RFC 3261 and companion RFCs)
Display
• 320 x 160 pixel grayscale graphical LCD
Feature Keys
• 18 dedicated keys
- 6 illuminated line keys
- 8 feature keys
- Illuminated mute key
- Illuminated headset and hands-free speaker
phone keys
- Dedicated hold key
• 4 context-sensitive soft keys
• 6 display/menu navigation keys
Power
• Built-in, auto-sensing Power over Ethernet with
support for IEEE 802. 3af and Cisco Inline Power
3
• External AC adapter (included; 24V DC @ 500mA min.)
SoundPoint IP Expansion Module Support
• Supports up to three SoundPoint IP Expansion Modules
Headset and Hearing Aid Compatibility
• Amplified headsets with an RJ-9 jack are
recommended
• Hearing aid compatible and compliant to ADA
requirements of Section 508 recommendation
Audio Features
• Full-duplex hands-free speakerphone featuring the
Polycom Acoustic Clarity Technology
- Type 1 compliant with IEEE 1329 full duplex
standards
• Individual volume settings with visual feedback for
each audio path
• Support for G.711 µ/A and G.729A (Annex B) codecs
• Voice activity detection
• Comfort noise fill
• DTMF tone generation / DTMF event RTP payload
• Low-delay audio packet transmission
• Adaptive jitter buffers
• Packet loss concealment
• Acoustic echo cancellation
• Background noise suppression
Call Handling Features
• Distinctive incoming call treatment / call waiting
• Call timer
• Call transfer, hold, divert (forward), pickup
• Called, calling, connected party identification/
information
• Local three-way conferencing
• One-touch speed dial, redial
• Call waiting
• Remote missed call notification
• Last call return
• Intercom
• Automatic off-hook call placement
• Do not disturb function
User Interface
• Local feature-rich GUI
• Time and date display
• Shared call appearance, bridged line appearance (Key
System emulation)
• Multiple call appearances
• Flexible line appearance (requires SIP 1.5.x or later)
• User configurable contact directory and call history
(missed, placed, and received)
• Customizable call progress tones
• Wave file support for call progress tones
Presence and Instant Messaging
• Presence: buddy list, my status, watched and blocked
lists (MS RTC / Windows
®
Messenger compatible)
• Instant messaging (MS RTC / Windows Messenger
compatible)
• Unicode UTF-8 character support. Multilingual user
interface encompassing Chinese, Danish, Dutch,
English (Canada / US / UK), French, German, Italian,
Japanese, Korean, Norwegian, Portuguese, Russian,
Spanish, Swedish
Network and Provisioning
• Dual 10/100 Mbps switched Ethernet ports
• Manual or dynamic host configuration protocol (DHCP)
network setup
• Time and date synchronization using SNTP
• FTP / TFTP / HTTP / HTTPS server-based central
provisioning for mass deployments
• URL syntax for boot server address
(requires BootROM 3.0.x +)
• Web portal for individual unit configuration
• Support for IEEE 802.1p/Q tagging (VLAN), Layer 3 TOS
• NAT support – static
• RTCP support (RFC 1889)
• Event logging
• Local digit map
• Hardware diagnostics
• Status and statistics quer
Advanced Server Features
• Message waiting indication
• Multiple registrations
• Server redundancy
• Emergency proxy routing
Security
• Digest authentication
• HTTPS secure provisioning (requires SIP 1.5.x +)
• Support for “signed” software executables (requires
BootROM 3.0.x +)
Approvals
• FCC Part 15 (CFR 47) Class B
• ICES-003 Class B
• EN55022 Class B
• CISPR22 Class B
• AS/NZS 3548 Class B
• VCCI Class B
• EN55024 Class B
• EN61000-3-2; EN61000-3-3; EN-61000-6-1
Safety
• UL 60950
• CE Mark
• CAN/CSA-C22.2 No. 60950
• EN 60950
• IEC 60950
• AS/NZS 3260
Operating Temperature
• +10 to 40 degrees C (+50 to 104 degrees F)
Relative Humidity
• 20% to 85%, noncondensing
Storage Temperature
• -40 to +70 degrees C (-40 to +160 degrees F)
SoundPoint IP 600 Comes With:
• SoundPoint IP 601 base unit
• Handset with handset cord
• Base stand
• Network (LAN) cable
• Power adapter
• Quick Start Guide
• Product registration card
• Windowed keycaps and blank label sheet
Size
• 10.5 in x 6 in x 7.5 in x 1.75 in
(26.5 cm x 15 cm x 19 cm x 4.5 cm) (W x H x D x T)
Weight
• Shipping: 2.75 lb (1.26 kg)
Part Numbers / UPC Codes
• 2200-11631-001 / 6108 0702 2701 for NA, TWN
• 2200-11631-002 / 6108 0702 2718 for Japan
• 2200-11631-012 / 6108 0702 2725 for AU, NZ
• 2200-11631-015 / 6108 0702 2732 for ROA, UK
• 2200-11631-016 / 6108 0702 2794 for Korea
• 2200-11631-022 / 6108 0702 2787 for China
• 2200-11631-119 / 6108 0702 2749 for Switzerland
• 2200-11631-122 / 6108 0702 2763 for ROE
Unit Box Dimensions / Weight
• 12.5 in x 13.25 in x 3.5in
• 2,210g (NA, TWN, JPN); 2,279g (AU, NZ); 2,205g
(all others)
Master Carton Quantity
• Five
Country of Origin
• Thailand
Warranty
• 1 year
1
SoundPoint IP 601 will only run on SIP version 1.6.2 or
higher.
2
Most of these features and functionality must be sup-
ported by the call server.
3
Cisco Inline Power can be used only to power the
SoundPoint IP 601 without an Expansion Module
attached to it. IEEE 802.3af PoE or an AC adapter
should be used to power the SoundPoint IP 601 with
one or more Expansion Modules.
©2005 Polycom, Inc. All rights reserved.
Polycom, the Polycom logo and SoundPoint are registered trademarks of Polycom, Inc. in the U.S. and various countries.
All other trademarks are the property of their respective owners. Specifications subject to change without notice.
To Previous Page
Loading...
