Polycom SoundPoint Pro SE-225 User Manual

SoundPoint
®
Pro
Model SE-225
Installation Instructions
and User’s Guide
Polycom
®
, SoundPoint
®
Pro, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S.
and various countries. ©2000 Polycom, Inc. All Rights Reserved. 1725-06215-001 Rev A
Don't forget to mail in yourOwnerRegistration Card!
Polycom, Inc., 1565 Barber Lane, Milpitas, CA95035
Telephone 408.526.9000 or toll-free 1.800.POLYCOM
Facsimile 408.526.9100 Internet www.polycom.com

Polycom SoundPoint Pro SE-225 Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wi-Fi	No
Ethernet LAN	-
Headset connectivity	2.5 mm
RJ-11 ports quantity	2
Speakerphone	Yes
Microphone frequency	300 - 3300 Hz
Input frequency	60 Hz
AC adapter output voltage	100 V
Power consumption (typical)	10 W
Lines quantity	2 lines
Phonebook capacity	99 entries
Number of handles included	1 pc(s)
Noise level	81 dB

Weight and Dimensions

Depth	254 mm
Width	226 mm
Height	51.05 mm
Weight	1000 g

Summary

Important Safety Instructions

Introduction and Installation

Installation Process

Guidance on preparing for and performing the installation of the phone.

Getting Connected

SoundPoint Pro Operation

Call Management

Speaker, Headset, and Conference Modes

Conference Call Operations

Volume Control and Directories

Directory Structure and Speed Dial Management

Line and System Settings

Troubleshooting

Troubleshooting Overview

General guidance for resolving installation and usage issues.

Common Issues and Solutions

Solutions for common problems like no dial tone, audio issues, and display errors.

Regulations and Warranty

Polycom Warranty and Liability