Polycom COMMUNICATOR C100S - LED Light Ring Indications; Setup

Polycom
®
Communicator User Guide - 4
Setup
Insert the Setup Wizard CD
included with your package and
follow the onscreen instructions.
When prompted, connect the
Polycom
®
Communicator C100S
to the port on your computer in the
following manner:
Flip open the back cover of the
Polycom
®
Communicator C100S unit.
Unwind the USB cable.
Open up the back cover/stand
to its locked position.
(For best acoustic performance, the
unit is designed to stand at a 40º
angle to the surface it rests upon.)
Insert the USB cable of the unit
into a USB port on your computer.
When the unit has been connected,
complete the software and
hardware installation as per the
onscreen instructions.
LED Light Ring Indications
State Light Ring IndicationLED
Mute
Solid Red
Call on Hold
Solid Green
Incoming call
Flashing Green
Idle
Clear
Off hook, call being set up, or in an active call
Solid Green