VIRTUAL EDITION INSTALLATION POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
D
EPLOY REALPRESENCE COLLABORATION SERVER USING A 3RD PARTY VIRTUAL ENVIRONMENT TOOL
12 POLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
For more information on the virtual environment tools, refer to their respective
documentation on VMware or Microsoft website.
When you are using Hyper-V, you are recommended to disable the Virtual
Machine Queue of the Network Interface Card (NIC). For more information, see
https://support.microsoft.com/en-us/kb/2902166.
Polycom recommends that a VMware or Hyper-V administrator install the soft-
ware. After installation into the virtual environment, additional configuration
should be done by someone who understands video conferencing.
Adding the Configured RealPresence Collaboration Server, Virtual
Edition, Instance in the RealPresence Platform Director
After the IP is assigned to RealPresence Collaboration Server, Virtual Edition,
you need to add the configured RealPresence Collaboration Server, Virtual
Edition, instance as an existing instance in the RealPresence Platform Director.
Then you need to assign licenses to the RealPresence Collaboration Server,
Virtual Edition, in the RealPresence Platform Director.
For more information, refer to the RealPresence Platform Director System
Administrator Guide.
To Next Page
Loading...
