APPLIANCE EDITION INSTALLATION POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
F
IRST ENTRY POWER-UP AND CONFIGURATION
46 POLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
First Entry Power-up and Configuration
Before power up the system for the first time, you must configure it to your local
network settings using the LAN Configuration Utility in the USB Key.
Modify Network Settings in USB Key
The USB Key contains a text file, lan.cfg, which holds the factory default IP
address parameters. These parameters must be modified to your local network
settings using the LAN Configuration Utility in the USB Key.
NOTE: LAN configuration utility
The RealPresence Collaboration Server (RMX) 1800 must use the LAN configu-
ration utility in a USB Key to change the IP address.
1. To modify the USB Key settings:
2. Take the USB Key from the Installation Accessories kit and insert it into
the PC workstation.
ADDITIONAL INFORMATION: In Windows XP:
•The Polycom Documentation option is automatically selected. Click
OK.
In Windows 7:
• Select Open Folder to view files using Windows Explorer.
3. Double-click the index.hta file.
4. In the Language Menu window, click the documentation language
hyperlink, for example English.
5. In the Polycom End User Licenses Agreement window, read the agree-
ment and click the Accept Agreement button.
6. In the Product Type Selection window, click the RealPresence Collab-
oration Server type hyperlink, for example RMX 2000.
7. Under the Initial Setup Utility, click the LAN Configuration Utility
hyperlink.
To Next Page
Loading...
