LOGIN TO REALPRESENCE COLLABORATION SERVER POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
S
ET AVAILABLE LANGUAGES IN THE LOGIN SCREEN
58 POLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
2. Start the Web Client application on the workstation.
a In the Web browser's address line, enter the IP address of the MCU as
assigned to it by the DHCP or as you assigned to it (if a DHCP is not
configured in your environment) in the format: http://<MCU IP
Address>.
A
DDITIONAL INFORMATION: For RealPresence Collaboration Server Virtual
Edition, you must enter https://<Control Unit IP Address>.
bClick Enter.
A
DDITIONAL INFORMATION: The Web Client Login screen is displayed.
Solve the browser environment error
If the error “Browser environment error. Please close all the browser sessions”
appears, close all the browser sessions, and reconnect to the MCU. If the error
message appears again, either run the automatic troubleshooter utility or manu-
ally preform the suggested troubleshooting procedures.
3. In the RealPresence Collaboration Server Web Client Login screen, enter
the default Username (POLYCOM) and Password (POLYCOM) and click
Login.
Set available languages in the Login Screen
By default, the Collaboration Server Web Client interface is displayed only in
English. However, the system administrator can choose the languages available
for selection on the Login screen. These languages are represented by flags.
1. To set available languages in the Login screen:
To Next Page
Loading...
