APPLIANCE EDITION INSTALLATION POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
U
NPACK REALPRESENCE COLLABORATION SERVER (RMX) 1800/2000/4000
22 P
OLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
2. Determine the location of the Collaboration Server on the rack:
• Allow for a 1U gap above and below the system for ventilation.
• Use the Rack Spacer (item no. 3) to predetermine its position on the rack
post, making sure that square studs of the spacer fit into the rack post's
square/rounded mounting holes. Mark the spacer's location on the rack
post. Repeat this process for the 3 remaining vertical posts ensuring that
the system can be horizontally seated.
Figure 1-1: Front view of RealPresence Collaboration Server (RMX) 2000/4000 rail
runner assembly
To Next Page
Loading...
