Polycom realpresence 1800 - Page 27

POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6 APPLIANCE EDITION INSTALLATION
INSTALLING THE REALPRESENCE COLLABORATION SERVER (RMX) 1800
P
OLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE 25
Installing the RealPresence Collaboration
Server (RMX) 1800
The Polycom RealPresence Collaboration Server 1800/2000/4000 Appliance
Edition can be installed in a rack.
For the RealPresence Collaboration Server 1800 system, you also need a shelf to
mount it in a rack. This system can also be placed directly on a level surface.
Mount the RealPresence Collaboration Server (RMX) 1800 in a Rack
You need a shelf to mount the RealPresence Collaboration Server (RMX) 1800
in a rack.
TASK
1. To mount the system in a rack:
2. Install the shelf, supplied by the rack manufacturer, in the rack.
3. Mount the RealPresence Collaboration Server (RMX) 1800 on the shelf.
4. Fasten the RealPresence Collaboration Server (RMX) 1800 to the rack
with screws through the four holes in front mounting brackets of the
RealPresence Collaboration Server (RMX) 1800.
ADDITIONAL INFORMATION: