STARTING CONFERENCES USING DEFAULT PROFILES POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
S
TART A NEW CONFERENCE USING A DEFAULT PROFILE
62 POLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
2. In the Conferences pane, click New Conference ().
ADDITIONAL INFORMATION: The New Conference-General dialog box opens.
3. Select a conference profile from the Profile drop-down list.
4. If you know the IP address of your participants, you can add them to
your conference: click the Participants tab > New.
ADDITIONAL INFORMATION: Enter a name and the IP address for the participant
and click OK.
By default, the RealPresence Collaboration Server dials out to these specified
participants when the conference starts.
You can also send the meeting dialing string to your participants so they can
dial in to the conference themselves. For more information, see Joining a
Conference Using Dialing Strings.
5. Click OK to accept default settings.
6. The conference starts immediately and appears in the Conferences list.
ADDITIONAL INFORMATION: Your meeting participants appear in the Participants
pane.
To Next Page
Loading...
