If you know the extension number of the phone that is 
ringing, press MORE twice, press PICKUP, enter the ex-
tension number and press #. Alternatively, if you have 
people programmed onto your screen, press the green 
flashing light next to the person’s name when someone 
is calling them, and you will pick up this call. 
 
If you are in a pickup group with the phone that is ring-
ing, press MORE twice, then GRPICKUP to get the long-
est ringing caller in your group. 
Dial 1
st
 party, press  MORE then CONFRNC in screen. 
This will put the caller on hold and allow you to invite 
the 3
rd
 party. Dial 3
rd
 party and invite them into your 
conversation. If they are  happy to join, press MORE and 
then press CONFRNC again to connect the call. 
Press FORWARD in screen. Highlight when you want to 
forward your calls e.g. Always, No Answer or Busy, and 
press SELECT in screen. Enter the number you want to 
forward your calls to (e.g. 5555 if forwarding to 
voicemail) and press ENABLE. 
 
To cancel a forward, repeat process above, and select 
DISABLE. 
To manually record a conversation press *1 during the 
call, and the recording will begin from the start of the 
call. To pause the recording, press *3 and to resume the 
recording press *7. 
Please ensure you inform your administrator if you rec-
ord a call, as you will only have a finite amount of stor-
age.  
If your number is automatically withheld (determined by 
your administrator), dialing #31 before the number you 
are calling will show your number for outgoing calls. 
To reverse this step or to withhold your number if the 
administrator has not set this automatically, dial *31 
before your next call and your number will be withheld. 
 
 
 
 
 
Basic Call Handling 
Make an internal call: Dial extension number or press 
the button next to the name of the person you want to 
call. 
 
Make an external call: Dial the number you require. 
YOU DO NOT NEED ‘9’ FOR AN EXTERNAL LINE. 
 
Receive a call: Lift receiver or press ANSWER in the 
screen. 
 
Hold a call: Press         to hold a caller. Press the same 
key again to retrieve the caller. 
 
 
Announced – press TRANSFER key        , dial number, 
announce caller and replace receiver. 
 
Blind – press TRANSFER key, dial number and replace 
receiver when you hear a ringing tone. 
 
If the extension is busy or no one picks up the call, 
press CANCEL in the screen to return to caller.  
If the extension answers but can’t take the transfer, 
press CANCEL in the screen to return to caller.  
If the extension rejects the call, press RESUME in the 
screen to return to the caller.  
 
You will see the number of missed calls that have been 
presented to your handset in the top right-hand side of 
the screen.  
To view a list of your missed calls press the down navi-
gation key. To view a list of your outbound calls, press 
the right navigation key. To view a list of your inbound 
calls, press the left navigation key. You can view a 
combined list by pressing the REDIAL key. 
 
Transfer A Call 
 
Retrieve A Call (if transfer is not successful) 
 
Call History 
 
Pickup Calls 
 
3-Way Conference Call 
 
Call Forward 
 
Call Recording (this is a licenced feature) 
 
Call Parking 
Whilst on a call, press PARK and dial the extension 
number that you want to park the call on, followed by 
#. 
 
To retrieve a parked call, with the receiver down, press 
MORE twice in the display, then GETPARK, and enter 
the extension number the call was parked on, followed 
by #. If the call was parked on your extension, press 
MORE twice, then GETPARK, then #. 
To set up your voicemail for the first time, press the 
personal voicemail button         and enter your 6-digit 
default password (this will be on the New Account email 
you have received).  
 
You will be asked to enter a new 6-digit password and 
then to enter it again to confirm.  
 
You will then be asked to record your name greeting. 
If you have new messages, an envelope will appear next 
to your line key in the screen, the status bar will show 
that you have a new message, and there will be a flash-
ing red light at the top of your handset. 
 
Press the personal voicemail button to access your mail-
box and follow these instructions:  
 
1.  Enter your password followed by # 
2.  Press 1 to listen to your messages 
3.  Press # to save 
4.  Press 2 to repeat 
5.  Press 3 to delete 
 
 
 
Voicemail 
 
Retrieving Messages 
 
Withholding Number