Punch-in effects
Pattern tracks remixing
Audio rendering
Tracker configuration
Firmware updates
In case of trouble
Warranty & Safety
Appendix
The FX step effects list
Performance mode FX list:
List of musical scales filters available for the pads
What's in the box?
Quick start / Tips & tricks
Basics:
Play Pattern: press Play.
Play Song: Song + Play (from the Pattern view).
Main volume: Master + jog-wheel.
To edit pattern press Rec (red frame), press it again to disable edit mode (green frame).
Important features and information:
The Tracker runs on 5V/1A and can be poweredfrom a power bank.
Firmware update: go to Config > Firmware > chose file from SD card > Confirm.
Switching pattern view: hold Pattern key + one or two of the Note/Ins/Fx colored keys.
Off/Fade/Cut step: turn the jog-wheel all the way left.
Changing (transposing) many parameters at once: select steps > choose the parameter
(Note/Instrument/Fx1/Fx2) > use the jog-wheel.
Overwrite all steps with a single value: select steps > choose the parameter > use grid
pads.
Copy/Paste/Del works in: Pattern – for all the selected steps; Song – for slots/tracks,
Sample Loader – samples/instruments.
To Next Page
Loading...
