Need help?Do you have a question about the Polyend Tracker+ and is the answer not in the manual?
General| Sampling Resolution | 16-bit, 44.1kHz |
|---|---|
| Storage | MicroSD card |
| Display | 7-inch LCD |
| Inputs | 1/4" TS mono input, 3.5mm stereo input |
| Outputs | Stereo Line Out (2x 1/4" TS), Headphones Out (1/8" TRS) |
| Connectivity | USB-C, MIDI In/Out |
| Power | USB-C (5V, 1A) |
| Polyphony | 8 voice polyphony |
Details the physical ports, buttons, and features of the Polyend Tracker+.
Provides instructions for powering the Polyend Tracker+ on and off.
Guides users through opening a project and adjusting master volume.
Illustrates the hierarchical structure of projects, patterns, instruments, and FX.
Explains the required format and structure of the SD card for optimal operation.
Explains the project as the highest structural element and its components.
Covers creating, opening, and manually saving projects via the file menu.
Details the process of deleting projects from the project browser.
Explains how to set and modulate the project tempo in Song section.
Describes managing instruments and samples for patterns.
Explains patterns as a combination of tracks and steps.
Outlines the workflow for formatting and creating patterns.
Details pattern and step editing in Pattern Mode.
Explains the four main components of a step and their dedicated buttons.
Introduces instruments as sound sources, covering sample and synth types.
Details general and automation parameters for sample instruments.
Introduces the five available synth models and their macros.
Explains how to create and edit synth patches using the editor.
Guides users through editing and saving synthesizer patches.
Lists and briefly describes the 37 available step FX types.
Provides a categorized reference of step FX and their functions.
Covers audio control in Master pages, including output levels and effects.
Lists available audio sources like line-in, mic, radio, and USB audio.
Outlines the process of sampling, from connecting gear to programming patterns.
Details the steps and parameters for sampling audio sources.
Explains rendering audio from patterns or projects to files.
Explains sending and receiving audio via USB connection.
Guides users in creating basic songs from scratch and editing existing ones.
Introduces master effects and their common processing.
Details the three Master pages: Master, Track Mixer, and Global Mixer.
Explains the Master Delay send effect and its parameters.
Describes the Master Reverb send effect and its parameters.
Details the Limiter as an insert effect and its parameters.
Explains MIDI setup and configuration within the Config menu.
Details assigning MIDI instruments to steps and their parameters.
Explains using Tracker+ as a MIDI synthesizer with external controllers.
Introduces Performance Mode for live improvisation and performance.
Guides users through performing live with performance effects.
Lists all 21 performance effects and their parameters.
Details assigning MIDI controllers to performance effects and track selection.
Explains the process of registering the device for support and firmware updates.
Guides users through updating the Polyend Tracker+ firmware.
Provides information on SD card compatibility and backup procedures.
Explains accessing the SD card via USB for file transfers.
To Next Page
