192
Polyend Tracker+ Manual
NOTES
7.24 Panning LFO
Cycle reset with a
new note step
Instrument Pan
Instrument
22
Speed 16
Instrument Pan
Panning
L R L R
Step h Rate
Speed 8
Rate 16
Rate 8
1 5 9 132 6 10 143 7 11 154 8 12 16
Step will trigger the LFO Rate change
Speed set in the Instrument Parameter Panning LFO will apply
Previous Step LFO Rate continues
h Rates
1
9
5
13
F5 22
---- ----
------- -- ----
------- -- ----
F5 22
----
h 16
Speed Default
Step Rate Trigger
or
LFO
128 96 64 48 32 24 16 12 8 6 4 3 2 3/2 1
3/4 1/2 3/8 1/3 1/4
316
(3/16)
1/6 1/8
/12
(1/12)
/16
(1/16)
/24
(1/24)
/32
(1/32)
/48
(1/48)
/64
(1/64)
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
h
Various
Selects the rate for the instrument panning LFO. This setting is in increments
with respect to project tempo. LFO is found in the instrument parameters P2/2.
The LFO is triggered by each step either using the rate from the step pan LFO
or the default instrument parameter speed if no LFO FX is set. The LFO cycle
is reset each trigger.
Panning LFO Rate
Pad 1 = 128, Pad 13 = 16, Pad 30 = 1, Pad 34 = 1/2,
Pad 46 = 1/8. Advise using Jog.
FX Steps
7
To Next Page
Loading...
