Polyend Tracker+ - 6.2 Sample Based Instrument Parameters

109
Polyend Tracker+ Manual
NOTES
Instruments
6
6.2 Sample Based Instrument Parameters
A series of instrument parameters are accessible for controlling, shaping
and modulating the sound. For selected sample instruments 1-48, two
pages are accessible directly from toggling the [Instrument Parameter]
button. Page 1 is general parameters while Page 2 focusses on parameter
automation. Remember, pressing [Delete/Backspace] on a selected
parameter will reset it to it’s default state.
Instrument
Parameters
Page 1 of 2: General Sample Based Parameters
Page 2 of 2: Automation Parameters
Press to select and cycle the instrument parameter pages
Screen buttons select the parameter options or [Right] [Left] to
navigate option. Then turn (Jog) or press [Up] [Down] to adjust / select
Volume
10.00 dB
Panning
-25
Tune
0
Cutoff
100
Finetune
0
Resonance
0
Filter Type
Low-pass
More
Instrument Parameters 1/2 0m:00s P1.008
Disabled
Low-pass
High-pass
Band-pass
1.Analog 3 18p
Destination
Type
Off
Sustain
100
Attack
0.020s
Release
0.050s
Decay
0.030s
Amount
100
Instrument Automation 2/2 0m:00s P1.008
OffVolume
EnvelopePanning
LFOCutoff
Wavetable Position
Granular Position
Finetune
1.Analog 3 18p