Polyend Tracker+ - 13.4 Resetting the Configuration

317
Polyend Tracker+ Manual
System
13
NOTES
13.4 Resetting the Conguration
There may be occasions when the changes in congurations have caused
problems and tracking back is not possible. An example may be that MIDI
settings applied may need to be reset. The whole conguration settings can
be reset to the defaults. This is performed in the cong menu.
▌ RESETTING CONFIG
1. Press [Cong].
2. In the main menu list select the ‘Firmware’ option using the screen
navigation buttons.
3. In the Firmware sub menu select ‘Reset Cong’.
4. Press [Apply], 6
th
Screen button and follow the prompts. Any previously
changed settings will be restored back to default values.