Polyend Tracker+ - 13.10 Hexadecimal Option

325
Polyend Tracker+ Manual
System
13
NOTES
13.10 Hexadecimal Option
The classic trackers typically used hexadecimal number format. This can be
a little daunting if unfamiliar and especially in the more modern age and
therefore decimal number is used as default. However, maybe for the more
nostalgic users, numbering in hex mode is also an option.
▌ CHANGING BETWEEN DECIMAL & HEXADECIMAL VIEW.
1. Press [Cong] for the conguration settings.
2. Press [Up] or [Down], 1
st
& 2
nd
Screen buttons to navigate to the
‘General’ menu. The arrow keys and (Jog) also used in the left main
menu list.
3. In the central window pane, Press [Up] or [Down], 4
th
& 5
th
Screen
buttons to navigate to the ‘Numbering mode’ option. The arrow keys can
be used to navigate in the central pane.
4. Press [Change], 6
th
Screen button. The options to change will appear.
5. Turn (Jog) or Press [Up] or [Down] to select between ‘Decimal, Steps
from 0’ to use standard decimal numbers starting at step 0, ‘Decimal,
Steps from 1’ where the decimal system is used and steps start at 1,
and the ‘Hexadecimal’ option for a classic tracker view.
6. Press [Apply], 6
th
Screen button.
Hexadecimal to Decimal Converter
Hex 1 2 3 4 5 6 7 8 9 A B C D E F
Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15