Polyend Tracker+ - 7.9 Tempo

176
Polyend Tracker+ Manual
NOTES
7.9 Tempo
1 1
9 9
5 5
13 13
16 16
D6 03
---- ----
D6 03
---- ----
D6 03
---- ----
D6 03
----
----
D6 03
---- ----
D6 03
----
TSTP
D6 03
---- ----
D6 03 T 50
----
D6 03
----
T200 D6 03
---- ----
Tempo
120
240
Stop
Example 1.
Pattern will play rst cycle and trigger the
tempo change on step 9. The entire
pattern tempo will change and continue
through subsequent pattern cycles until a
new tempo is triggered or set.
Example 1. Example 2.
Example 2.
Pattern will play at the dened tempo,
change when triggered then the pattern
will stop when the TSTP event is activated.
1 5 9 132 6 10 143 7 11 154 8 12 16
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
T
10 - 400%
Applies a % tempo change triggered on the step. TSTP Tempo Stop - Stops
the sequencer running. Given that MIDI is synchronised to the project tempo,
this will also affect MIDI Out clock.
Tempo change is applied to the entire pattern from the step onwards. A TSTP
command, applied with (Jog) left, will add a full stop step which will halt the
sequencer. Default tempo of 120 for this example.
Tempo Change
Pad 1 = TSTP, Pad 13 = 108%, Pad 25 = 208%,
Pad 48 = 400%. Jog is more precise in use.
FX Steps
7