Polyend Tracker+ - 7.23 Volume LFO

191
Polyend Tracker+ Manual
NOTES
7.23 Volume LFO
Speed 8
Instrument Vol
Cycle reset with a
new note step
Volume
Step g Rate
Speed 4
Rate 24
Rate 48
Step will trigger the LFO Rate change
Speed set in the Instrument Parameter Volume LFO will apply
Previous Step LFO Rate continues
g Rates
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
g
Various
Selects the rate for the instrument volume LFO. This setting is in increments
with respect to project tempo. LFO is found in the instrument parameters P2/2.
The LFO is triggered by each step either using the rate from the step volume
LFO or the default instrument parameter speed if no LFO FX is set. The LFO
cycle is reset each trigger.
Volume LFO Rate
Pad 1 = 128, Pad 13 = 16, Pad 30 = 1, Pad 34 = 1/2,
Pad 46 = 1/8. Advise using Jog.
FX Steps
7
1
9
5
13
F5 16
---- ----
------- -- ----
------- -- ----
F5 16
----
g 48
1 5 9 132 6 10 143 7 11 154 8 12 16
128 96 64 48 32 24 16 12 8 6 4 3
2 3/2 1 3/4 1/2 3/8 1/3 1/4
316
(3/16)
1/6 1/8
/12
(1/12)
Speed Default
Step Rate Trigger
or
Instrument Volume
Instrument
16
LFO