18
Polyend Tracker+ Manual
NOTES
Overview
1
1.5 Introduction to Tracks
Tracker has 16 tracks. The rst 8 can operate with sample instruments,
synths and MIDI and tracks 9-16 used for MIDI and synths. Each can be
congured with unique patterns made up of one or more instrument
combinations. Tracks are structural elements and the track mixer is found
in the master section but some track commands are also available in the
pattern pages, for example muting tracks. By default 4 tracks are displayed
for patterns.
▌NAVIGATING TRACKS IN THE PATTERN PAGE
1. Press [Pattern] to ensure pattern page is selected. 4 Tracks are
displayed by default.
2. Press [Left] or [Right] to navigate across all tracks. The green or red
highlighted step will anchor the navigation point.
3.
▌MUTING TRACKS IN PATTERN PAGE
1. Press [Pattern] to ensure pattern page is selected. 4 Tracks are
displayed by default.
2. To mute / unmute, Press [Shift] + The screen button for the respective
track. All 8 tracks are presented by the screen buttons when holding the
shift button. Muted tracks display in the screen keys dimmed.
3. Muting will be applied immediately the screen button is pressed. This is
different in the track mixer, where muting is applied when the mute
button is released.
▌CHANGING TRACK VIEW IN THE PATTERN PAGE
• 8 Tracks with only Note parameter: Press [Pattern] + [Note].
• 8 Tracks with Instrument parameter: Press [Pattern] + [Instrument].
• 8 Tracks with only FX1 parameter: Press [Pattern] + [FX1].
• 8 Tracks with only FX2 parameter: Press [Pattern] + [FX2].
• 8 Tracks with 2 selected parameters: Press [Pattern] + [P1] + [P2],
where ‘P1’ and ‘P2’ are 2 from; [Note], [Instrument], [FX1], FX2].
• Revert to 4 track mode, Press [Pattern]
To Next Page
Loading...
