Polyend Tracker+ - 12.6 Perform Effects List

306
Polyend Tracker+ Manual
Performance Mode
12
NOTES
12.6 Perform Effects List
Tracker+ has 21 performance effects that can be selected and loaded into
each of the 12 effect slots. The same effect can be applied to multiple slots.
While these are called effects, they in fact control parameters that apply
variations to the parameter values.
Effect # Name Range / Comments
1 Volume
-100 to +100.
Volume level adjustment
2 Panning
-100 to +100
Stereo Position
3 Tune
-48 to +48
Semitones. Also applies to MIDI.
4 Low-Pass Cutoff
-100 to +100.
Filter frequency adjustment
5 High-Pass Cutoff
-100 to +100.
Filter frequency adjustment
6 Band-Pass Cutoff
-100 to +100.
Filter frequency adjustment
7 Reverb Send
-100 to +100.
FX Send level
8 Delay Send
-100 to +100.
FX Send level
9 Sample Position
-100 to +100.
Audio sample start position
10 Sample End
-100 to +100.
Audio sample end position
11 Sample Playback
<<< >>>
Backward, Forward direction.
12 Volume LFO Speed
-28 to +28.
LFO Speed
13 Panning LFO Speed
-28 to +28.
LFO Speed
14 Finetune LFO Speed
-28 to +28.
LFO Speed
15 Filter LFO Speed
-28 to +28.
LFO Speed
16 Grain/WT LFO Speed
-28 to +28.
LFO Speed
17 Step Repeater
Off, 16, 12, 8, 6, 4, 3, 2, 1, 1/2, 1/3, 1/4, 1/6,
1/8, 1/12, 1/16.
18 Pattern Play Mode
Fwd, Back, Rnd, C1-C20
Fixed or Predened algorithm ‘C’ play modes
19 Pattern Length
1-128
Total length (all tracks - selected or not)
20 Bit Depth
-12 to +12
Bit depth adjustment
21 Overdrive
-100 to +100
Overdrive adjustment