201
Polyend Tracker+ Manual
NOTES
7.33 Reverb
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
t
0-100%
Sets the amount of the audio signal to send to the reverb effect. The reverb
effect settings are found in the Master section. Reverb size, damping, pre-
delay etc are adjusted generically, for the project in the master settings.
The effect is applied on the step triggered and the reverb will be heard and
extended through the pattern. The sound will depend on the master effect
settings too. This step effect only controls the audio amount sent to the reverb.
Reverb Effect Send
Pad 1 = 0%, Pad 13 = 25, Pad 25 = 51, Pad 37 = 76,
Pad 48 = 100%.
FX Steps
7
50
Step Reverb Send
Instrument
16
Master Reverb
FX2
Size
Damping
Predelay
Diffusion
Reverb send amount initiated with the note
Reverb will have an audio tail beyond its step
1
9
5
13
16
F5 16
---- ----
F5 16
----
F5 16
----
---- ----
----
---- ----
----
---
---
--
--
t 50
To Next Page
Loading...
