Polyend Tracker+ - 7.30 Band Pass Cutoff

198
Polyend Tracker+ Manual
NOTES
7.30 Band Pass Cutoff
Note and Instrument triggered
Band sweeps through the frequencies
1
9
5
13
16
F5 16
----
----
----
----
---
---
---
--
--
--
B 50
B 0
B 75
B100
---------
B 25
< 20Hz > 20KHz
0%
Frequency in %
100%
1 5 9 132 6 10 143 7 11 154 8 12 16
Band Pass
Cutoff
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
B
0-100%
Adjust the instrument cutoff frequency of the band pass lter. The instrument
lter is found in the instrument parameters P2/2 but can be disabled and this
effect will still operate.
The cutoff frequency can be triggered by each step applied. This allows
sweeps using only FX steps with multiple steps ramping the value or glitchy
sequenced lter effects.
Band Pass Filter
Pad 1 = 0%, Pad 13 = 25, Pad 25 = 51, Pad 37 = 76,
Pad 48 = 100%.
FX Steps
7
Filter Sweep