Polyend Tracker+ - 7.38 MIDI Messages or Synth Macros

206
Polyend Tracker+ Manual
NOTES
7.38 MIDI Messages or Synth Macros
Mod Wheel.
The destination parameter is dened in the instrument
parameter settings when a MIDI Instrument is used.
MIDI Message to control external device.
0 Bank
1 ModWh
2 Brth
3
4 Foot
5 Glide
6 Data
7 ChVol
8 Balnc
9
10 Pan
11 Exp
12
13
CC A
1
MIDI Channel 1
Instrument
Max 16 MIDI Instruments, each
can host up to 6 CC Values
Range 0 - 127
FX1 or FX2 + Value
CC Value to send
M01
a 24
Sends a CC Value of 24 to MIDI Channel 1.
Parameter to control is set in ‘Instrument Parameters’
1
9
5
13
16
C5 18
----
C6 18
----
C6 M01
----
---- ----
----
----
---- ----
---
---
--
--
a 24
F 32
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
a - f
0-127
For MIDI this issues a message out. This is typically CC but is selectable in
the Instrument Parameters. Requires a MIDI instrument set with the channel. If
a synth is the instrument, this will set its selected macro 1-6 parameter value.
While the glide effect operates on a time based pitch change and is referenced
from the previous step, the slide function operates using semitone increments
to control pitch from the current step note value. Values in denominations of 16
represent semitones.
MIDI CC A-F Messages or Synth Macros
Pad 1 = 0, Pad 13 = 32, Pad 25 = 64, Pad 48 = 127.
Use Jog for more precise changes.
FX Steps
7