Polyend Tracker+ - 10.8 Effect Config Options

277
Polyend Tracker+ Manual
NOTES
10.8 Effect Cong Options
Several options can be set in the ‘Cong’ menu for master effects. The
behaviour of the limiter can be changed between extreme and subtle. Also
the master mix reverb and delay can be congured to send before / pre the
volume level fader of after / post fader.
▌ SETTING THE CONFIG OPTIONS FOR MASTER EFFECTS
1. Press [Cong] to open the conguration menu.
2. In the rst column, select ‘Project Settings’. Use the 1
st
and 2
nd
Screen
button to navigate. Alternatively use [Left] or [Right] to navigate menus
and Turn (Jog) or [Up] or [Down] to select a function.
3. In the ‘Project Settings’ Sub menu the ‘Limiter mode’ and the ‘Sends
mode’ can be adjusted. Select from the central sub-menu with the 4
th
or
5
th
Screen button.
4. The Limiter options are:
• Subtle: Will affect how aggressive the envelope attack and release
operates. Subtle will give a gentle, transparent style and will be slow
in catching fast transients.
• Extreme: Will provide a more aggressive model. Will catch all of the
transients but will also affect the sound adding colour.
5. The Send effects:
• Pre-fader: Will send the audio to the effect irrespective of the
instrument volume. The effected signal will be louder.
• Post-fader: Will send the audio after it has been adjusted by the
instrument volume and therefore ensures the effect is more
proportionally consistent with the level, especially when modulated
6. Press [Change], 6
th
Screen button to change the option.
7. Navigate with the 4
th
or 5
th
Screen button and press [Apply], 6
th
Screen
button to accept the option.
Master Effects
10