Polyend Tracker+ - 7.3 None

170
Polyend Tracker+ Manual
NOTES
7.3 None
1
9
5
13
16
D6 03
---- ----
----
----
----
----
D6 03
----
D6 03
----
D6 03
----
D6 03
----
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
-
N/A
No effect is applied and hence the sound for the step will purely be based on
the instrument and note. This is basically an empty effect.
Default state for any step is that the FX1 and FX2 are empty. This effect can
be applied to remove an existing FX and reset to the normal empty state.
None - No FX Applied
FX1 FX2
The last two slots are for FX. They will be
indicated with dashed lines when empty. This is
the default empty state of a step.
Selected step will be bounded green or red in
recording edit mode. The part of the step to be
edited is solid lled when selected as per
illustration where FX1, Step 1 is shown selected.
N/A
FX Steps
7