62
Polyend Tracker+ Manual
NOTES
Pattern Format
4
4.6 Pattern Mode Page Layout Options
Pattern and step editing is performed in ‘Pattern’ Mode, selected by
pressing the [Pattern] button. To edit steps, select [Rec]. The view in pattern
mode can be changed in the cong options.
Track 1
– – – C5 – – – – – – – – – – – – – – – – – –
– – – C5 C4 D2 – – – – – – – – – – – –
– – – – – – C4 – – – – – – – – – – – – – – –
Track 5Track 3 Track 7Track 2 Track 6Track 4 Track 8
Track 1
– – – – – –
– – – – – –
C5 C5
1 2
– – – – – –
– – – – – –
C5 C5
– – – – – –
– – – – – –
Track 2
Track 1
– – – – – –
– – – – – –
C5 C5
– – – – – –
– – – – – –
C5 C5
– – – – – –
– – – – – –
Track 2
Press [Up] or [Down] or Turn (Jog) to navigate
vertically in the Tracker+ grid. Cursor will wrap
past the end to the start when using arrow keys
Press [Shift] + [Insert / Home] to reset
the cursor position to the start, step 1
Step Row
Change the pattern info for the top bar in the
Cong settings: General > Pattern top info.
Top bar: Off, Tracks Only or additional Info
Switch to 8 Track view.
Displays a single element across a block of 8 tracks
[Pattern] + [Note] - Displays 8 tracks, with only the note parameters
[Pattern] + [Instrument] - Displays 8 tracks, with only the instrument parameters
[Pattern] + [FX1] - Displays 8 tracks, with only FX1 parameters
[Pattern] + [FX2] - Displays 8 tracks, with only FX2 parameters
Hold [Pattern] + A combo of max 2 parameter buttons: Note, Instrument, FX1, FX2 to
display 2 parameters per track across 8 tracks.
Press [Pattern] to return to 4 tracks, all step parameters
To select a step
Press [Left] or [Right] to navigate
horizontally in the Tracker+ grid
1 1
2
C5 40 ---- P-25
C5 40 ----
C5 40 ---- P-25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
P 25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
C5 02 ---- P-20
C5 40 ---- H-25
C4 12 ---- A 4
C5 40 ---- P-20
C5 40 ---- P-25
C5 40 ---- P-25
2
3 3
4 4
5 5
6 6
7 7
9 9
11 11
13 13
15 15
8 8
10 10
12 12
14 14
Pattern
1
Length
32
Step Jump
0
Fill Preview Undo Redo
More
Track 2 Track 3 Track 4Track 1
Pattern 1 0m:00s P1.008 1.Analog 3 18p
1 1
2
C5 40 ---- P-25
C5 40 ----
C5 40 ---- P-25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
P 25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
C5 02 ---- P-20
C5 40 ---- H-25
C4 12 ---- A 4
C5 40 ---- P-20
C5 40 ---- P-25
C5 40 ---- P-25
2
3 3
4 4
5 5
6 6
7 7
9 9
11 11
13 13
15 15
8 8
10 10
12 12
14 14
Pattern
1
Length
32
Step Jump
0
Fill Preview Undo Redo
More
Track 2 Track 3 Track 4Track 1
Pattern 1 0m:00s P1.008 1.Analog 3 18p
The ‘top down’ view can be changed
to ‘left right’ in the Cong settings;
General > Pattern Arrangement