Polyend Tracker+ - 4.4 Copying and Pasting a Pattern

60
Polyend Tracker+ Manual
Pattern Format
4
4.4 Copying and Pasting a Pattern
Patterns can be copied and pasted between different pattern slots. This will
copy the entire pattern and its steps as well as the length conguration.
▌ COPYING AND PASTING A PATTERN
1. Press [Pattern] to select the pattern mode page.
2. The options on pages 1 & 2 are required during this process. Press
[More] to toggle between the two pages of pattern options.
3. Press [Rec] to select recording mode and allow editing. Screen buttons
will be unavailable, shown dim, otherwise.
4. On pattern page 1, select the pattern to copy, Hold [Pattern] 1
st
Screen
button + Turn (Jog). Example, select Pattern 1.
5. On pattern page 2, Press [Copy] Screen Button. The pattern is copied
to the clipboard.
6. On pattern page 1, select the pattern to paste into, Hold [Pattern] 1
st
Screen button, + Turn (Jog). Example, select Pattern 2.
7. On pattern page 2, Press [Paste] Screen Button. The pattern is pasted
into the current pattern and will overwrite any existing data. It is possible
to continue to paste the pattern to other pattern slots.
8. The [Undo] or [Redo] screen buttons can be used if required to restore
a previous pattern state.
NOTES