Polyend Tracker+ - 10.6 Saturation, Space & Bass Boost

274
Polyend Tracker+ Manual
NOTES
10.6 Saturation, Space & Bass Boost
Saturation, Space and Bass Boost are simple effects each carrying one
parameter that adjusts the amount of effect applied into the main audio out
or in the case of saturation, sets the dened preset.
Saturation is the rst effect in the entire master chain. This is selects from 5
preset options for subtle distortion. The space option, ranges 0-8 and is a
widener enhancing the stereo image. Bass boost has a 0-100% range with
represents approx 0-5 dB. This enhances the bass frequencies around 80
Hz, which can be subtle on some material. Both will be applied based on
taste so try tweaking and adjusting on different songs to nd the sweet spot
for the material and track.
▌ ADJUSTING THE BASS BOOST / SPACE PARAMETERS
1. Press [Master] to select master section. Press again if needed until the
‘Master’ Page 1/3 is displayed.
2. To select the effect:-
• Press [Saturation], 6
th
Screen button
• Press [Bass Boost], 7
th
Screen button
• Press [Space], 8
th
Screen button
• The (Left) or (Right) buttons also navigate and select.
3. Turn (Jog) or Press [Up] or [Down] to adjust the setting.
Volume
-33.08 dB
Reverb Delay EQ
Saturation
Soft Clip
Hard Clip
Soft Clip
Saturate
Overdrive
Drive+
Bass Boost
5
Limiter
Space
1
Master 1/3 0m:00s P1.008
Master Effects
10
Saturation
Distortion Preset
Bass Boost
Bass Enhancer
Space
Stereo Enhancer