Polyend Tracker+ - 13.2 Generic Firmware Update

315
Polyend Tracker+ Manual
System
13
NOTES
13.2 Generic Firmware Update
Firmware updates may be provided by Polyend from time to time, to x
bugs or add new features. The process of updating can be performed in
several ways. When performing updates it is strongly advised to follow the
Polyend instructions supplied with each update. The instructions here are a
generic guide.
▌ FIRMWARE UPDATE
1. Download the latest rmware. Access rmware updates for your device
from your registered account at Polyend.
2. Copy the downloaded .ptf rmware le into the /Firmware folder. This
can be found in the root directory of the SD Card.
3. Insert the SD card into Tracker+ and power up
4. Press [Cong] to open the conguration and settings menu.
5. Navigate to the ‘Firmware’ menu. In the central window, select the
rmware option to install.
6. Press [Conrm], Screen button.
7. The rmware will install and the on screen prompts provided will guide.
The install process is typically less than 1 minute.
8. Tracker+ should restart, but press On/Off if a manual start is required
after 100% of the update is completed.
Download rmware
[Cong] - ‘Firmware’ - [Conrm]
Sub Folders
SD Card
/Root Directory
/Firmware
PolyendTracker_x.2.x.ptf
PolyendTracker_x.1.x.ptf
PolyendTracker_x.4.x.ptf
1
2
5 64