199
Polyend Tracker+ Manual
NOTES
7.31 High Pass Cutoff
Note and Instrument triggered with no ltering
Sample triggered at step 1 will be fully ltered
1
9
5
13
16
F5 16
---- ----
----
----
----
---
---
---
---
--
--
--
--
H 50
H 75
H100
----
H 25
< 20Hz > 20KHz
0%
Frequency in %
100%
1 5 9 132 6 10 143 7 11 154 8 12 16
High Pass
Cutoff
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
H
0-100%
Adjust the instrument cutoff frequency of the high pass lter. The instrument
lter is found in the instrument parameters P2/2 but can be disabled and this
effect will still operate.
The cutoff frequency can be triggered by each step applied. This allows
sweeps using only FX steps with multiple steps ramping the value or glitchy
sequenced lter effects. 0% plays the sound as normal, all frequencies
present, while 100% will almost cutoff all frequencies.
High Pass Filter
Pad 1 = 0%, Pad 13 = 25, Pad 25 = 51, Pad 37 = 76,
Pad 48 = 100%.
FX Steps
7
Filter Sweep
To Next Page
Loading...
