Polyend Tracker+ - 12.7 Remixing

307
Polyend Tracker+ Manual
Performance Mode
12
NOTES
12.7 Remixing
Tracker+ can remix tracks on the y. There are two techniques worth noting
when applying track mixing. Firstly the ‘Pattern Play Mode’ effect has 20
algorithms C1-C20 that allow pattern mixing based on predened shufing
of existing patterns. This is called ‘Custom Play Mode’. Secondly tracks can
manually be remixed live when playing a song. Both techniques operate in
performance mode.
Custom Play Mode
▌ USING A CUSTOM PATTERN PLAY EFFECT
1. Press [Perform] to select the Performance Mode page.
2. Press [Rec] to select record mode. Values and bounding box are red.
3. Navigate between effect slots, Press [Left] or [Right].
4. To load the effect for the selected slot, Press [Up] or [Down]. Select the
‘Pattern Play Mode’ effect.
5. Hold [PAD] + Turn (Jog) to change the value of the specic effect row.
Fwd-Forward, Rev- Reverse and Rnd - Random options as well as ‘C’
options. Set the following example as a starting point. Any C1-C20
value can be selected:-
• Pad row 2 is the 2
nd
row of effect values Set to C18.
• Pad row 3, is 3
rd
row of effect parameters. Set to C19.
• Pad row 4, is the 4
th
row of effect parameters. Set to C20.
6. It is possible to set up, other ‘Pattern Play Mode’ effects into other slots
to cover more of the other C1-C17 custom presets.
7. Press [Rec] to turn record mode off.
8. Trigger the pads to activate the alternate mixes based on the predened
‘C’ Setting triggered. Also it is possible to use slot 1 as a dynamic and
temporary change by holding [PAD] Row 1 and Turning (Jog). This will
clear when released.